Pellet Machine For Sale

Pellet Making Machine

Pellet making machine is designed to make pellets from biomass powdered material. The finished biomass pellet is a great substitute for wood, raw coal, fossil fuel, liquefied gas. With high thermal value and renewability, it is widely used in city heating system, hot water supply, industry fuel, etc. It is a high promising and high-value renewable resource. Want to turn biomass waste into biomass fuel, welcome to contact Beston. We would supply a superior pellet machine and one-stop service for you.

Pellet Making Machine
Pellet Making Machine

Extensive Raw Materials to Make Biomass Pellet

Raw Materials to Make Pellets
Raw Materials to Make Pellets

The raw materials are wood chips, sawdust, straw, bamboo chips, rice husks, palm shell fiber, peanut shells, tree bark, cotton stem, corn husks, furfural residue, coffee grounds, etc. They are extensive and sustainable that can be obtained from agriculture and forestry throughout the year. If you have abundant biomass waste, don’t just throw it away. Buy a pelleting machine to dispose of them in an eco-friendly way. It is meaningful and valuable to turn waste biomass material into pellet.

In order to make sure the feeding materials have a uniform and consistent density, moisture, and size, raw materials should be reprocessed in advance.

  • First, size: you need to process the raw material into powder (about 2-5mm).
  • Second, moisture content: should be less than 10%. A dryer is a choice for your project.

Certainly, the pellet maker machine for sale can be customized if your raw material is specific.

Models and Parameter of Beston Pellet Making Machine For Sale

Pellet Making Machine Is Ready For Shipment
Pellet Making Machine Is Ready For Shipment

BKL-10, BKL-20, BKL-25, BKL-30 are available for you to choose. You can tell us your raw materials and productivity demand. Then, we would recommend the proper model for you. Also, you can pick your favorite biomass pellet machine in terms of the following parameters. You will obtain attractive pellet mill machine price from us.

Model Capacity (t/h) Power (kw) Diameter of die (mm) Host size (mm) Jiaolong siloo (mm) Conveyor (mm) Dust remover (mm)
BKL-10 1—1.5 75KW 450 2850*1100*2000 2200*800*1100 7000*500 φ750*2600
BKL-20 1.5—2 90KW 450 2850*1100*2000 2200*800*1100 7000*500 φ750*2600
BKL-25 2—2.5 110KW 576 3200*1300*2500 2600*850*1300 8000*500 φ750*2600
BKL-30 2.5—3 132KW 596 3200*1300*2500 2600*850*1300 8000*500 φ750*2600

Reasons on Broad Prospect to Make Biomass Pellet

Biomass Pellets
Biomass Pellets

It has a broad prospect to make biomass pellet. As professional pellet making machine manufacturer, we would like to talk about the reasons with you. Here, you can find detailed explanations:

High economical: biomass pellet has attractive calorific value. It has small size, resistant to combustion, and is easy to store and transport. Meanwhile, the price is lower than coal and natural gas. So, it is widely used in heating, industry fuel, etc. You will make a deal of money to make pellets.

Renewable resource: biomass pellet from pellet making machines for sale is a kind of renewable resource that does not run out. The new biomass waste is generated every year. It is endless. You don’t need to worry about the storage capacity and exploitable amount. While, from the prediction of International Renewable Energy Organization, the storage capacity of petroleum, natural gas and coal is able to exploit for 60 years. Thus, using biomass energy is a significant development trend in the future, both politically and economically.

Eco-friendly: there is no pollution produced during the production process and use. What’s more important, making pellet with pellet machine for sale turns waste into energy resource. So, adopting biomass pellet is going green. In the future, there will be more reliance on the eco-friendly and renewable resource- biomass pellet.

Video of Pellet Making Machine For Sale

How to Make Pellets With Pellet Mill Machine

Working Process of Making Pellets
Working Process of Making Pellets

➡️ Crushing to required size: raw materials with 1-2mm diameter are suitable for pelletizing directly. If your raw materials are larger, you need to prepare a crrusher for your project.

➡️ Reducing water content: if the water content is larger than 10%, you need to remove extra water with a dryer.

➡️ Pelletizing: through mixing and pressing, high-quality pellet is produced.

➡️ Cooling: pellet just come out is hot. Therefore, it is needed to cool with forced cooling of air-cooled silo.

➡️ Packaging: store the pellets in bags. It is better to put the finished pellet in a dry place to avoid moisture.

The above is the working process of the pelletizer for sale. If you have deeper questions on how to make pellets. Welcome to contact us to experience professional explanation service. Of course, you can see the working video of wood pellet machine to have a better and comprehensive understanding.

Advantages of Beston Pellet Mill for Sale

  • Long service lifetime: pellet mills for sale adopt Q235B and the mold adopts 20CrMoTi. The materials adopted has high strength and toughness, especially high and low-temperature impact toughness.
  • ☞ Because pellet mills are circular mold flat, it is suitable for pelletizing all materials from the principle of work.
  • High efficiency: finished pellet come out immediately after feeding.
  • ☞ Adopts timing and quantitative feeding device to supply materials automatically and timely. It is fully closed and automatic.
  • ☞ The pellet machine is equipped with an automatic lubrication system that can transfer butter lubrication timely and quantitatively. So, it ensures 24 hours continuous works with no maintenance.
  • ☞ Both sides of the mould can be used twice that reduces the user’s processing cost.
  • ☞ Equipped with the dust collector, it makes the whole workshop clean and tidy without dust.
  • ☞ Enclosed automatic breaking and automatic discharging device enable the discharging more conveniently.
  • Low cost: only needs electricity in the whole production process.
  • Easy operation: adopts a simple touch-tone to start up the pellet mill equipment.
  • ☞ Adopts vertical ring mold: with the vertical feeding mode, raw materials are evenly distributed around the mold through the feeding port. And the stress point of the mold is the same. It has a simple structure that is easy to replace wearing parts. All wear parts on pellet manufacturing machine from Beston are processed by heat treatment to promote hardness.
Pellet Making Machine For Sale
Pellet Making Machine For Sale

Beston Services For Your Pelletizing Project

Design process flow diagram for free: Due to different land areas, the flow diagram is different. If you have an existing factory, you can provide the land area for us. Beston ( would give a professional and specific flow diagram for you.

♥ Free and simple installation instructions online.

♥ Send samples for free testing.

Warranty: 12 months

♥ Lifetime technical support

♥ 24/h online to solve any problems you meet on the pellet machine.

Two Sets of Pellet Making Machines
Two Sets of Pellet Making Machines

FAQs Before Placing an Order For Pellet Making Machine

-1. How much is the pellet mill?
The pellet making machine price is different because of different models and spare parts. We need to confirm the details with you before giving an accurate price list for you.

-2. How long does it usually take you to make a delivery?
It depends on the number of pellet maker and auxiliary equipment you order.
One set: 20 workdays.
Above five sets: 25-40 workdays; 40-50 workdays are needed when you order the accessory equipment: dryer and pulverizer.

-3. What is the diameter of the finished biomass pellet?
6mm, 8mm, 10mm, 12mm, 16mm are the standard biomass pellet diameter. The diameter is proportional to output. With the same material and same sawdust pellet machine, the greater output you will make if you choose to make a larger diameter biomass pellet.

-4. What are the accessories? And what are the functions of them?
Feeding conveyor, horizontal wring dragon, power distribution cabinet, dust collector are equipped for one set of pelletising machine. Because pellet just comes out from the machine is hot, the forced cooling of air-cooled silo can be equipped according to customers’ demand. Functions are listed as below:

  • Feeding conveyor: with it, raw materials are fed into horizontal wring dragon rapidly, automatically, and conveniently.
  • horizontal wring dragon: the inlet is connected to the feeding conveyor, and the outlet is connected to the main engine. It plays an important role in ensuring even feeding.
  • power distribution cabinet: the power of the whole pellet maker machine is integrated in the distribution cabinet. It is the place to control power switch.
  • dust collector: clear away the dust produced in the process of production.

-5. How many container cabinets are needed?
For BKL-10 and BKL-20 pellet maker for sale, a small cabinet is enough. For BKL-25, BKL-30 rice husk pellet machine, a large cabinet is required. Note: it is all for one set of machine. If you need many sets, it is up to the actual situation. Get competitive pellet machine price here.

Pellet Mill Machine
Pellet Mill Machine


Pellet making machine completely fulfills the recycle of biomass waste. With the development of the economy and promotion of peoples’ living standard, biomass pellet has becoming a new-type, eco-friendly, and widely used biomass fuel. Biomass pellet has a wide prospect in the market. Therefore, you will make a large quantity of money when you investing in a pelletizing business. Fetch the profitable business chance and get the competitive and reasonable pellet mill price from Beston now! Also, you can buy pyrolysis plant, charcoal making machine from us.


    Please specify your requirements:

    1-What kind of solution will meet your demand? (Key point)

    2-What kind of material and expected end product are you planning to have? (Right solution begins from material and product)

    3-When is the project supposed to be running? (Key info for A-Z project programming)

    4-Budget for machinery purchasing? (Key info for right model)

    5-Points that you really focus on. (Customized service from our project consultant)