Pyrolysis Plant in Australia

Pyrolysis plant in Australia can turn waste (waste tires, waste plastics, etc.) into valuable pyrolysis oil, carbon black, and syngas. This offers a solution to Australia’s growing waste disposal problem, promoting environmental sustainability. Out of environmental commitments to citizens, the Australian government encourages investment in sustainable waste treatment facilities. This enhances the feasibility of pyrolysis project in Australia. Coupled with the huge economic benefits of pyrolysis products, pyrolysis machine in Australia has become a good investment direction.

Pyrolysis Plant for Sale in Australia
Pyrolysis Plant for Sale in Australia

Severe Challenges of Waste Treatment in Australia

The growing waste treatment challenge has brought many problems to Australia’s environment and society. Some key issues include:

Landfill Dependency
Landfill dependency: Australia is highly dependent on landfill disposal. However, this way is not sustainable in the long run. This leads to environmental problems such as groundwater pollution and greenhouse gas emissions.
Limited Recycling Infrastructure
Limited recycling infrastructure: Australia has limited recycling infrastructure, particularly for certain types of waste such as plastics. This is not conducive to long-term sustainable development.
Increasing Waste Volume
Increasing waste volume: Australia has a developed economy. Industrial, commercial, and residential life will bring a large amount of various industrial waste, such as waste plastics, wastewater, and sludge. These wastes have a bad effect on the Marine and land environment.

Pyrolysis Plant in Australia – Sustainable Solution for Waste Treatment

For Australia’s serious waste treatment issues, Beston’s pyrolysis machine in Australia offers a sustainable disposal method. It uses thermal decomposition at high temperatures and low oxygen levels to convert various waste materials into valuable pyrolysis oil, carbon black and syngas. Please continue reading to know about the pyrolysis working principle and Beston equipment models.

Working Principle of Plastic/Tire/Rubber/Oil Sludge Pyrolysis Plant in Australia

  • Feeding: Raw materials such as waste plastic, tire, or oil sludge are fed into the pyrolysis reactor either by hand or by a Beston screw feeder. It depends on the equipment model purchased by the customer,
  • Pyrolysis: The heating system provides heat to the reactor by burning fuel internally. The raw materials undergo thermal cracking at high temperatures and low oxygen levels. They are transformed into liquid oil and oil-rich gas.
  • Condensation: Part of the oil-rich gas is liquefied into liquid pyrolysis oil in the condenser. The oil is stored in the bottom oil storage tank.
  • Syngas purification: The remaining gas is cooled by the flue gas cooler and then enters the spray tower for treatment. This removes some harmful substances from the flue gas. The purified syngas is recycled as fuel for the pyrolysis process, providing heat for the cracking.
  • Slagging: When the carbon black in the storage tank reaches the predetermined height, the slagging transmission device starts working. Then the cooled carbon black is sent out of the slagging device.

Please be aware that the process may vary slightly depending on the specific equipment models and types of waste materials being processed. The following is the working process of a continuous pyrolysis plant for reference.

Working Process Flow Chart of BLL-30 Continuous Pyrolysis Plant

Models of Pyrolysis Equipment for Sale in Australia

You can get a preliminary understanding of our pyrolysis machinery through the parameter table below. If this arouses your strong interest in pyrolysis machine in Australia, you can also contact us directly.

ModelBLJ-3BLJ-6BLJ-10BLJ-16BLL-16BLL-30
Capacity1-3t/d4-6t/d8-10t/d12-16t/d8t/d (only for rubber powder)30-35t/d
Working ProcessBatchBatchBatchBatchSemi-continuousFully continuous
Reactor Sizeφ1400*4900mmφ2200*6000mmφ2600*6600mmφ2800*7100mmφ2800*7100mmφ1800*18500mm
Reactor MaterialQ345RQ345RQ345RQ345RQ345R310S stainless steel
Drive System350 reducer+4kw drive motor400 reducer+5.5kw drive motor400 reducer+5.5kw drive motor500 reducer+7.5kw drive motor500 reducer+7.5kw drive motorZQH650-50 reducer+15kw frequency conversion motor
Land (L*W*H)18m*4.2m*6m30m*12m*8m30m*13m*8m33m*13m*8m33m*13m*8m70m*20m*10m
Power16.65kw37.85kw44.3kw55.6kw55.6kw256kw
Burner2*200,000 kcal2*300,000 kcal2*300,000 kcal2*400,000 kcal2*400,000 kcal2.5 million kcal per set
Total Weight of Shipped MaterialsAbout 18tAbout 24.5tAbout 28tAbout 34.5tAbout 34.5tAbout 150t
Number of Containers1*40HQ1*40FR+1*40HQ+1*20 GP1*40FR+2*40HQ1*40FR+2*40HQ1*40FR+2*40HQ25m*8m bulk cargo+8*40HQ
Noise (dB)≤60≤60≤60≤60≤60≤60
Heating MaterialsFuel oil (including tyre/plastic pyrolysis oil), natural gas, LPG, diesel, etc.
Condensing SystemVertical Condenserφ426*3000
Single piece condensing area
7.58m2
φ630*3600
Single piece condensing area
17.8m2
φ630*3600
Single piece condensing area
17.8m2
φ820*3600
Single piece condensing area
35.6m2
φ820*3600
Single piece condensing area
35.6m2
φ920*3200
2 sets of vertical condenser
3-in-1 Condenser3000*2200*2250
Condensing area
17.51m2
5800*2260*2500
Condensing area
35.85m2
5800*2260*2500
Condensing area
35.85m2
8000*2260*2500
Condensing area
49.5m2
8000*2260*2500
Condensing area
49.5m2

Raw Materials for Pyrolysis Plant in Australia

Scrap tyres
Waste tire: It includes waste tires from various vehicles, such as private vehicles like bicycles and motorcycles, commercial vehicles like buses and vans, construction vehicles like forklift trucks and bulldozers, and agricultural vehicles like tractors and harvesters.
Waste plastic
Waste plastic: It includes plastic bags, plastic bottles, disposable food packaging, appliance housings, foam products, etc. It includes different types of plastic, such as PE (Polyethylene), PP (Polypropylene), and PS (Polystyrene).
Waste rubber
Waste rubber: It also mainly comes from industrial production and residents’ daily use, such as rubber gloves, pacifiers, latex mattresses, industrial seals, rubber soles, tire manufacturing, etc.
Oil sludge
Oil sludge waste: It is mainly generated in the exploitation, transportation, and refining processes of the petroleum industry. It includes oil field sludge, tank bottom sludge, refinery sludge, oil-contaminated soil, etc.

Please note that there are differences in the proportion of pyrolysis products for different materials. It is recommended that you discuss your specific requirements with Beston Group. You can also send samples to Beston Group for further testing and evaluation.

Different End Products and Their Applications of Pyrolysis Plant in Australia

Different Final Products

Raw Materials Final Products
Waste tyre pyrolysis oil, carbon black, steel wire, and syngas
Waste plastic pyrolysis oil, carbon black, and syngas
Waste rubber pyrolysis oil, carbon black, and syngas
Oil sludge pyrolysis oil, sand, and water

Wide Applications of Different Final Products

Pictures End Products Wide Applications
Pyrolysis oil Pyrolysis oil It can be directly sold and widely used as industrial fuel in industries such as steel and iron, ceramics or chemical industries, power plants and so on.
It can be used as raw oil for deep reprocessing into non-standard diesel.
Carbon black Carbon black It can be directly sold.
It can be reprocessed into activated carbon and then be applied in rubber industry, coatings industry, battery industry, etc.
Steel wire Steel wire It can be sold directly as scrap for profit.
It can be reprocessed and used to make wire products such as fencing, mesh, cables, and springs.
Syn-gas Syngas It can be directly recycled for heating the reactor.
It can be collected and used for industrial heating in the field of metallurgy, ceramic production, drying bricks, etc.

Investment Prospects Of Pyrolysis Plant in Australia

With increasing global demand for energy and multiple applications of pyrolysis products, there is a brilliant market prospect for investing in pyrolysis machine in Australia. According to statistics, the global pyrolytic oil market is worth more than $300 million in 2021 and is expected to reach nearly $500 million by 2031. From 2022 to 2031, the compound annual growth rate will exceed 4%. Therefore, the pyrolysis project is a promising investment direction. Whether directly selling pyrolysis oil, carbon black, or syngas, or reprocessing these products, customers who invest in pyrolysis project in Australia can profit from the project. If you want to know more details about the investment prospects of pyrolysis, please go to the pyrolysis plant project report.

Pyrolysis Oil Market

Successful Cases Study of Beston Pyrolysis Plant All Over The World

Beston Group has a track record of successful pyrolysis projects worldwide. We are professional and experienced in pyrolysis equipment manufacturing. If you are exploring investment opportunities for pyrolysis plant in Australia, you can click the cases below to learn more about relevant cases.


    CONTACT US

    Please specify your requirements:

    1-What kind of solution will meet your demand? (Key point)

    2-What kind of material and expected end product are you planning to have? (Right solution begins from material and product)

    3-When is the project supposed to be running? (Key info for A-Z project programming)

    4-Budget for machinery purchasing? (Key info for right model)

    5-Points that you really focus on. (Customized service from our project consultant)